Thor Skid Plate Kit For Audi A4 Cabrio 2002-2009

The Thor A4 Skid Plate Kit Includes:

SKU A1007- 1 Thor Aluminum Skid Plate.
SKU A2013- 1 Spacer Kit
SKU A2006- 1 Thor Audi A4 Hardware Kit, containing:

2 Aluminum Thor Side Wings.
1 Thor Rivet Nut Installation Tool.
1 Thor Audi A4 Bolt Kit

Fits:

2002-2009 Audi A4 Cabrio B7 Platform

WHY YOU SHOULD BUY EVOLUTION'S THOR AUDI A4 ALUMINUM SKID PLATE!

Audi's oil pans are made of a paper-thin cast aluminum that is easily cracked by many objects such as road debris, manhole covers and speed bumps. While your car may be at stock height, there is only approximately 4 inches of ground clearance with your oil pan. If you are lowered from stock height, there is very little room for error when negotiating an object in your path. Here is some information on this Evolution Aluminum Skid Plate for those of you that haven't seen it before.

• The plate is 5052 grade aluminum and is 4.8mm (.191 inches) thick.
• Weighs 16.7 pounds
• Protects your cars oil pan, a/c pump, radiator & transmission (does not cover the transmission fully).
• Bolts to you vehicle with 3 structural mounts and up to two additional plastic mounts.
• 45 to 60 minute install.
• Once the plate is installed it is only 4-5 bolts that need to be removed for your oil change(1-2minutes).
• Fits all engines and transmissions except the V8
• Never rusts.
• Maximum amount of ground clearance possible provided.
• Air duct to allow air flow onto the transmission.
• Specially designed so you won't have to worry about air forcing your plastic tire well lining back and into your tires.
• Designed, tested and proven by EVOLUTION IMPORT INC.
• Shipped to your door step in a box as a complete kit. No other attachments need to be purchased.
• Draft/Design by: EVOLUTION IMPORT INC.
• CNC Machine Manufactured.

A detailed easy to follow, step by step guide is only located on our website and not included in the kit. The Install Guide for your kit is: Thor Audi A4 Install Guide

Note: There could be surface scratches on the skid plate during manufacturing, handling or shipping which won't compromise the usefulness of the product. Please note that we won't warranty a skid plate for surface scratches as the skid plate is going to get scratched immediately after installation.

Oil Changes:

With the Thor skid plate we do not offer an oil drain hole option. If we were to put one on the skid plate, the hole would be located right on the ramped section of the skid plate. This would be bad as the hole could easily catch an object on the road causing a major hazard for you and other vehicles on the road. So the skid plate will need to be removed in order to gain access to the oil filter and drain plug. However if you want to put your own access holes into the skid plate, it is at your own risk. We have added two 1/2 inch sight holes so you can locate your oil plug for proper alignment while you cut your own oil drain hole. Removal of the skid plate for oil changes is very quick and easy, taking 1-2 minutes. Only the bottom four or five bolts need to be removed and the skid plate drops right down and off of your Audi. The aluminum side wings don't need to be unbolted from the skid plate.